Comparative study of sediment phosphorus immobilization via the addition of lanthanum-modified and thermal-modified...

Lanthanum-modified drinking water treatment sludge (DTSLa) and thermal-modified drinking water treatment sludge (TDTS) were prepared from drinking water treatment sludge(DTS). The adsorption properties of DTSLa and TDTS on phosphate in water and the effects on the controlled release and morphology of phosphorus in sediment at different dosages (0%, 2.5%, 5%) were discussed. Combining with SEM, BET, XRD, FTIR, and XPS characterization methods, the immobilization mechanism of DTSLa and TDTS on phosphorus in sediment was explored. The addition of TDTS can transform NH4Cl-P (loosely sorbed P), BD-P (bicarbonate-dithionite extractable P), and Org-P (organic P) into stable NaOH-rP (metal oxide-bound P) in sediment, and the conversion amount will increase with the increase of TDTS supplemental amount. DTSLa converted NH4Cl-P, BD-P, Org-P, and NaOH-rP to more stable HCl-P (calcium-bound P). At the same time, the content of WSP (water-soluble phosphorus) and olsen-P (NaHCO3 extractable P) in sediment can be reduced by the addition of DTSLa and TDTS, reducing the risk of the release of phosphorus from the sediment to the overlying water. In addition, phosphorus can be directly removed from the interstitial water by DTSLa and TDTS, so as to reduce the phosphorus concentration gradient between the overlying water and the interstitial water, thus inhibiting the release of phosphorus from interstitial water to overlying water. The results showed that DTSLa is better than TDTS in terms of its adsorption capacity and adsorption effect on endogenous phosphorus in water, so DTSLa is more suitable to be used as a sediment conditioner to control the phosphorus content in water and sediment.