Related Experiment Video
Updated: Jul 27, 2025

Author Spotlight: Employing Green-Chemistry Principles for Safe and Sustainable Synthesis of Biodiesels
Published on: April 19, 2024
Preparation and characterization of biodiesel from waste cooking oils using heterogeneous Catalyst(Cat.TS-7) based on
Mayas Saad1, Baraa Siyo1, Hussam Alrakkad1
1Department of Chemistry, Faculty of Science, Tishreen University, Lattakia, Syria.
Abstract:
Biodiesel is known as renewable biodegradable and less polluting material. It is produced by transesterification of triglycerides found in vegetable oil or animal fats. Many studies have been conducted on biodiesel production using homogeneous catalysts, but they are very expensive and not environmentally friendly. On the other hand, heterogeneous catalysts are cost-effective from the production process and ecofriendly. In this study, zeolite ore was used as a solid heterogeneous catalyst for the production of biodiesel by the transesterification reaction of waste cooking oils and studying the possibility of reusing it for several cycles under optimal reaction conditions. The catalyst was characterized by different techniques, such as TG-DTA, FTIR, XRD and TPD methods. High-quality biodiesel with 93% yield was obtained under optimal reaction conditions with the ratio of oil to methanol (1:9) mol, amount of catalyst (1.5% by weight of oil), at temperature (60 °C), and reaction time of 2 h. Biodiesel has been characterized using infrared spectroscopy, GC/MS, its physical and chemical specifications have been studied and compared with the American (ASTM) and European (EN) standards.
More Related Videos
09:10Experimental Protocol for Biodiesel Production with Isolation of Alkenones as Coproducts from Commercial Isochrysis Algal Biomass
Published on: June 24, 2016
11:28Biomass Conversion to Produce Hydrocarbon Liquid Fuel Via Hot-vapor Filtered Fast Pyrolysis and Catalytic Hydrotreating
Published on: December 25, 2016
Related Concept Videos
Catalysis
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...