Long-term onsite monitoring of a sewage sludge drying pan finds methane emissions consistent with IPCC default...

As the wastewater sector moves towards achieving net zero greenhouse gas (GHG) emissions, quantifying and understanding fugitive emissions from various sewage treatment steps is crucial for developing effective GHG abatement strategies. Methane (CH4) emissions from a sludge drying pan (SDP) were measured at a wastewater treatment plant in Australia for more than a year, using a micrometeorological technique paired with open-path lasers. The emission rate was tightly associated with sludge additions, climatology, and operational processes. The mean emission rate during the 90 weeks after initial sludge addition was 2.3 (± 0.8) g m-2 d-1, with cumulative emissions of approximately 32 t of CH4. A dynamic temporal pattern of emissions was observed, highlighting the importance of continuous (or near-continuous) measurements for quantifying SDP emissions. A Methane Correction Factor (MCF) expressed as a fraction of the measured chemical oxygen demand of the sludge, was determined to be 0.17 after 63 weeks (the median operational cycle duration at the facility). This is broadly consistent with, albeit slightly less than, the IPCC default value of 0.2 for shallow anaerobic lagoons. These emission measurements will support wastewater utilities that employ open air sludge drying processes to develop effective GHG abatement strategies.