Related Experiment Video
Updated: Jul 27, 2025

The Portable Chemical Sterilizer PCS, D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
Chargeability study of disinfectants and the optimization of design parameters of a handheld electrostatic
Aarti Chauhan1,2, Manoj Kumar Patel1,2, Manoj Kumar Nayak1,3
1Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, Uttar Pradesh, India.
Abstract:
Apart from aerosols, contaminated surfaces with SARS-CoV-2 virus are the significant carriers of virus transmission. The disinfection and sanitization of the indoor and outdoor places are one among the powerful and effective strategies to avoid the surface-to-human transmission of SARS-CoV-2 (Severe Acute Respiratory Syndrome Coronavirus 2) through frequent touch and physical contact. Electrostatic spraying is one of the effective and efficient methods to apply the liquid-based sprays on surfaces to be disinfected or sanitized. This technique covers the directly exposed and obscured surfaces uniformly and reaches to hidden areas of the target. In this paper, the design and performance parameters of a motorized pressure-nozzle based handheld electrostatic disinfection device were optimized and the chargeability of ethanol (C2H5OH), formaldehyde (CH2O), glutaraldehyde (C5H8O2), hydrogen peroxide (H2O2), phenol (C6H5OH) and sodium hypochlorite (NaClO) has been critically investigated. The chargeability indicator for disinfectants was presented in terms of the charge-to-mass ratio. The significant value of the charge-to-mass ratio of 1.82 mC/kg was achieved at an applied voltage of 2.0 kV, the liquid flow rate and pressure of 28 ml/min and 5 MPa, respectively. The experimental results are well aligned to the proposed theoretical context.
Related Concept Videos
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Hand hygiene
Hand washing...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Antimicrobial Effectiveness
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...

