Effect of phosphogypsum adding on setting kinetics and mechanical strength of geopolymers based on metakaolin or fly...

Our study aims to highlight the effects of the addition of phosphogypsum on certain fresh and hardened characteristics of geopolymer matrices based on metakaolin or fly ash. In the fresh state, workability and setting were studied by rheology and by the electrical conductivity measurement. The hardened state was characterized by XRD, DTA, SEM, and compressive strength measurement. Workability investigations reveal that the addition of phosphogypsum increases the viscosity, which limited the phosphogypsum addition rate to 15 wt% for metakaolin-based matrices and 12 wt% for fly ash-based matrices, with a setting retarding effect in both cases. Analyses of the matrices show dissolution of gypsum along with formation of sodium sulfate and calcium silicate hydrate. Moreover, the introduction of phosphogypsum to these matrices up to a mass rate of 6% has no significant effect on the mechanical strength. Beyond that rate, the compressive strength drops from a value of 55 MPa for the matrices without addition down to 35 MPa and 25 MPa when the addition rate is 12 wt% for the metakaolin-based and fly ash-based matrix, respectively. This degradation seems to be due to the increase in porosity created by addition of phosphogypsum.