Related Experiment Video
Updated: Jul 27, 2025

Exploring the Effects of Atmospheric Forcings on Evaporation: Experimental Integration of the Atmospheric Boundary Layer and Shallow Subsurface
Published on: June 8, 2015
Influence mechanism of thermally enhanced phase change on heat transfer and soil vapour extraction
Qi-Teng Zheng1, Chun-Bai-Xue Yang2, Shi-Jin Feng3
1Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China.
Abstract:
Thermal enhanced soil vapour extraction (T-SVE) is a remedial technique involving gas, aqueous, solid and nonaqueous phases along with mass and heat transfer. Interphase mass transfer of contaminants and water evaporation/condensation will cause the redistribution of phase saturation, eventually affecting the performance of T-SVE. In this study, a multiphase, multicompositional and nonisothermal model was developed to simulate the T-SVE treatment of contaminated soil. The model was calibrated using published data from the SVE laboratory and T-SVE field experiments. The temporal and spatial distributions of the contaminant concentrations in the four different phases, the mass transfer rates and the temperatures are presented to reveal the coupling interactions that occur between multiple fields during T-SVE. A series of parametric studies were carried out to investigate the effect of water evaporation and adsorbed/dissolved contaminants on the T-SVE performance. It was found that endothermic evaporation, exothermic condensation and the interaction between different removal paths of a contaminant played critical roles in the thermal enhancement of SVE. Ignoring them can result in significant differences in the removal efficiency values.
Related Concept Videos
Phase Transitions: Vaporization and Condensation
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Phase Changes
A substance melts or freezes at a temperature called its melting point and boils or condenses at its boiling point. These temperatures depend on pressure. High pressure favors the denser form of the substance, so typically, high pressure...
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Mechanisms of Heat Transfer II
Phase Transitions

