Related Experiment Video
Updated: Jul 27, 2025

Experimental Protocol to Determine the Chloride Threshold Value for Corrosion in Samples Taken from Reinforced Concrete Structures
Published on: August 31, 2017
Protective Performance of Coated Reinforcement in Coral Concrete under Dry/Wet Cycling
Hongji Cao1, Qing Wu1, Muhammad Akbar1,2
1College of Civil Engineering and Architecture, Jiangsu University of Science and Technology, Zhenjiang 212000, China.
Abstract:
The actual protective performance of the coated reinforcement in coral concrete was investigated by measuring the chloride ion diffusion coefficient, electrochemical analysis, and numerical simulation. The test results show that the corrosion rate of coated reinforcement in coral concrete under the action of wet and dry cycles is kept at a low level, and the Rp value is always greater than 250 kΩ·cm2 during the test period, which is in the uncorroded state and has good protection performance. Moreover, the chloride ion diffusion coefficient D is in accordance with the power function relationship with the wet and dry cycle time, and a time-varying model of chloride ion concentration on the surface of coral concrete is established. The surface chloride ion concentration of coral concrete reinforcement was modeled as a time-varying model; the cathodic zone of coral concrete members was the most active, increasing from 0 V to 0.14 V from 0 to 20 years, with a large increase in potential difference before the 7th year, and a significant decrease in the increase after the 7th year.
More Related Videos
Related Concept Videos
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Corrosion of Reinforcement
However, over time and under certain conditions like carbonation, chloride ingress, and cracking this protective state can be compromised. Steel has areas with...
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Permeability of Concrete
Curing of Concrete
Impact Strength of Concrete

