Experimental and Numerical Research of Post-Tensioned Concrete Beams

The purpose of this paper is to present a new approach for the modelling of post-tensioned beams with calibration of the FE model to experimental results until the load capacity and post-critical state are reached. Two post-tensioned beams with different nonlinear tendon layouts were analysed. Material testing for concrete, reinforcing steel and prestressing steel was performed prior to the experimental testing of the beams. The Hypermesh program was used to define the geometry of the spatial arrangement of the finite elements of the beams. The Abaqus/Explicit solver was used for numerical analysis. The concrete damage plasticity model was used to describe the behaviour of concrete with different laws of elastic-plastic stress-strain evolution for compression and tension. Elastic-hardening plastic constitutive models were used to describe the behaviour of steel components. An effective approach to modelling the load was developed, supported by the use of Rayleigh mass damping in an explicit procedure. The presented model approach ensures good agreement between numerical and experimental results. The crack patterns obtained in concrete reflect the actual behaviour of structural elements at every loading stage. Random imperfections found during experimental studies on the results of numerical analyses were also discussed.