Related Experiment Video
Updated: Sep 9, 2026

Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques
Published on: November 11, 2013
Preparation of Cu7.2S4@N, S co-doped carbon honeycomb-like composite structure for high-rate and high-stability
Chao Peng1, Lijuan Yue2, Yu Cui3
1College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
Abstract:
Sodium ion batteries (SIBs) attract most of the attention as alterative secondary battery systems for future large-scale energy storage and power batteries due to abundance resource and low cost. However, the lack of anode materials with high-rate performance and high cycling-stability has limited the commercial application of SIBs. In this paper, Cu7.2S4@N, S co-doped carbon (Cu7.2S4@NSC) honeycomb-like composite structure was designed and prepared by a one-step high-temperature chemical blowing process. As an anode material for SIBs, Cu7.2S4@NSC electrode exhibited an ultra-high initial Coulomb efficiency (94.9%) and an excellent electrochemical property including a high reversible capacity of 441.3 mAh g-1 after 100 cycles at 0.2 A g-1, an excellent rate performance of 380.4 mAh g-1 even at 5 A g-1, and a superior long-cycle stability with a capacity retention rate of approximately 100% after 700 cycles at 1A g-1.
Related Concept Videos
Ionic Crystal Structures
Most monatomic ions behave as charged spheres, and their attraction for ions of opposite charge is the same in every direction. Consequently, stable structures for ionic compounds result (1) when ions of one charge are surrounded by as many ions as possible of the opposite...
Metallic Solids
All metallic solids exhibit high thermal and electrical conductivity, metallic luster, and malleability. Many...
Valence Bond Theory
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...

