Related Experiment Video
Updated: Jul 26, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Simultaneous immobilization of multiple heavy metals in polluted soils amended with mechanical activation waste slag
Mengyu Ma1, Zhihao Ha2, Xiangqun Xu2
1Hubei Novel Reactor & Green Chemical Technology Key Laboratory, Key Laboratory for Green Chemical Process of Ministry of Education, School of Chemistry and Environmental Engineering, Wuhan Institute of Technology, Wuhan 430074, China; College of Resources and Environmental Science, South-Central Minzu University, Wuhan 430074, China; Engineering Research Center for Heavy Metal Pollution Control of Hubei Province, College of Resources and Environmental Science, South-Central Minzu University, Wuhan 430074, China.
Abstract:
Heavy metal soil contamination has become an increasingly serious problem in industrial development. However, industrial byproducts used for remediation are one aspect of green remediation that can contribute to sustainable practices in waste recycling. In this study, electrolytic manganese slags (EMS) were mechanically activated and modified into a passivator (M-EMS), and the heavy metal adsorption performance of M-EMS, heavy metal passivation ability in soil, dissolved organic matter (DOM) change and its effect on the microbial community structure of soil were investigated. The findings revealed that the maximum adsorption capacities of As(V), Cd2+, Cu2+ and Pb2+ were 76.32 mg/g, 301.41 mg/g, 306.83 mg/g and 826.81 mg/g, respectively, indicating that M-EMS demonstrated remarkable removal performance for different heavy metals. The Langmuir model fits Cd2+, Cu2+ and Pb2+ better than the Freundlich model, and monolayer adsorption is the main process. Surface complexation played a major role in the As(V) adsorption's on the surface of metal oxides in M-EMS. The passivation effect was ranked as Pb > Cr > As>Ni > Cd > Cu, with the highest passivation rate of 97.59 % for Pb, followed by Cr (94.76 %), then As (71.99 %), Ni (65.17 %), Cd (61.44 %), and the worst one was Cu (25.17 %). In conclusion, the passivator has the effect of passivation for each heavy metal. The addition of passivating agent can enhance the diversity of microorganisms. Then it can change the dominant flora and induce the passivation of heavy metals through microorganisms. XRD, FTIR, XPS and the microbial community structure of soil indicated that M-EMS can stabilize heavy metals in contaminated soils through four main mechanisms: ion exchange, electrostatic adsorption, complex precipitation and the microbially induced stabilization. The results of this study may provide new insights into the ecological remediation of multiple heavy-metal-contaminated soils and water bodies and research on the strategy of waste reduction and harmlessness by using EMS-based composites in combination with heavy metals in soil.
More Related Videos
05:52Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Extraction: Advanced Methods