Optimizing fluidity and tensile strength of magnetically driven epoxy-cement repair materials based on response...

Underwater crack repair is challenging due to drainage and exhaust, slurry retention at fixed points, and other issues. Magnetically driven epoxy resin cement slurry was developed, which can perform directional movement and fixed-point retention of slurry under the effect of an applied magnetic field. This paper focuses on slurry fluidity and tensile properties. Firstly, in the preliminary pre-study, the main influencing factors of the ratios were determined. Then, the optimum range of each factor is determined by a single-factor experiment. Furthermore, the response surface method (RSM) is applied to obtain an optimal ratio. Finally, the slurry is characterized by micro. Results showed that the evaluation index F proposed in this paper can well evaluate the interaction between fluidity (X) and tensile strength (Y). The 2FI regression model and the quadratic regression model are developed with fluidity and tensile strength as the response values and Epoxy Resin (ER) content, water-cement ratio, Fe₃O₄ content and sulphoaluminate cement (SAC) content as the influencing factors, and have reasonable fit and reliability. The relationship between the degree of influence of the influencing factors on the response value X and the response value Y in ascending order was: ER content > water-cement ratio > SAC content > Fe₃O₄ content. The magnetically driven slurry made by the optimal ratio can reach a fluidity rate of 223.31 mm and a tensile strength of 2.47 MPa. This is with relative errors of 0.36% and 1.65% from the model predicted values. Microscopic analysis showed that the magnetically driven epoxy resin cement slurry had a favorable crystalline phase, surface morphology, and structural composition.