Efficient BiVO₄-Based Photoanode with Chemically Precipitated Hierarchical Cobalt Borate (Co-B_i) Oxygen Evolution...

The integration of cobalt borate OER catalysts with electrodeposited BiVO₄-based photoanodes through a simple drop casting technique was shown to provide an improvement of the photoelectrochemical performance of electrodes under simulated solar light. Catalysts were obtained by chemical precipitation mediated by NaBH₄ at room temperature. Scanning electron microscopy (SEM) investigation of precipitates showed a hierarchical structure with globular features covered in nanometric thin sheets providing a large active area, whereas X-ray diffraction (XRD) and Raman spectroscopy highlighted their amorphous structure. The photoelectrochemical behavior of samples was investigated by linear scan voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) techniques. The amount of particles loaded onto BiVO₄ absorbers was optimized by variation of the drop cast volume. The enhancement of photocurrent generation by Co-B_i-decorated electrodes with respect to bare BiVO₄ was observed with an increase from 1.83 to 3.65 mA/cm² at 1.23 V vs RHE under AM 1.5 simulated solar light, corresponding to a charge transfer efficiency of 84.6%. The calculated maximum applied bias photon-to-current efficiency (ABPE) value for optimized samples was 1.5% at 0.5 V applied bias. Under constant illumination at 1.23 V vs RHE, a depletion of photoanode performances was observed within an hour, likely due to the detachment of the catalyst from the electrode surface.