Ionic Conductivity and Mechanical Reinforcement of Well-Dispersed Polymer Nanocomposite Electrolytes

Nanoparticles are commonly added to polymer electrolytes to enhance both their mechanical and ion transport properties. Previous work reports significant increases in the ionic conductivity and Li-ion transference in nanocomposite electrolytes with inert, ceramic fillers. The mechanistic understanding of this property enhancement, however, assumes nanoparticle dispersion states─namely, well-dispersed or percolating aggregates─that are seldom quantified using small-angle scattering. In this work, we carefully control the inter-silica nanoparticle structure (where each NP has a diameter D = 14 nm) in a model polymer electrolyte system (PEO:LiTFSI). We find that hydrophobically modified silica NPs are stabilized against aggregation in an organic solvent by inter-NP electrostatic repulsion. Favorable NP surface chemistry and a strongly negative zeta potential promote compatibility with PEO and the resulting electrolyte. Upon prolonged thermal annealing, the nanocomposite electrolytes display structure factors with characteristic interparticle spacings determined by particle volume fraction. Thermal annealing and particle structuring yield significant increases in the storage modulus, G^', at 90 °C for the PEO/NP mixtures. We measure the dielectric spectra and blocking-electrode (κ_b) conductivities from -100 to 100 °C, and the Li⁺ current fraction (ρ_Li) in symmetric Li-metal cells at 90 °C. We find that nanoparticles monotonically decrease the bulk ionic conductivity of PEO:LiTFSI at a rate faster than Maxwell's prediction for transport in composite media, while ρ_Li does not significantly change as a function of particle loading. Thus, when nanoparticle dispersion is controlled in polymer electrolytes, Li⁺ conductivity monotonically, i.e., (κ_bρ_Li), decreases but favorable mechanical properties are realized. These results imply that percolating aggregates of ceramic surfaces, as opposed to physically separated particles, probably are required to achieve increases in bulk, ionic conductivity.