Multiobjective optimization of a hybrid electricity generation system based on waste energy of internal combustion...

In recent years, the interest in generating power through hybrid power generation systems has increased. In this study, a hybrid power generation system including an internal combustion engine (ICE) and a solar system based on flat plate collectors to generate electricity is investigated. To benefit from the thermal energy absorbed by solar collectors, an organic Rankine cycle (ORC) is considered. In addition to the solar energy absorbed by the collectors, the heat source of the ORC is the wasted heat through exhaust gases and the cooling system of the ICE. A two-pressure configuration for ORC is proposed for optimal heat absorption from the three available heat sources. The proposed system is installed to produce power with a capacity of 10 kW. A bi-objective function optimization process is carried out to design this system. The objective of the optimization process is to minimize the total cost rate and maximize the exergy efficiency of the system. The design variables of the present problem include the ICE rated power, the number of solar flat plate collectors (SFPC), the pressure of the high-pressure (HP) and low-pressure (LP) stage of the ORC, the degree of superheating of the HP and LP stage of the ORC, and its condenser pressure. Finally, it is observed among the design variables the most impact on total cost and exergy efficiency is related to the ICE rated power and the number of SFPCs.