Influence of juvenile wood proportion on density and modulus of elasticity in softwood boards for structural use: a...

Juvenile wood (JW) can influence the performance of structural boards since it presents lower physical and mechanical properties. This study aimed evaluate the influence of JW proportion on density and modulus of elasticity (MOE) on boards for structural use. Pinus taeda logs 30 years old, had growth rings manually counted (on the pith to bark direction), and the first six rings were painted with color red (0-6), followed by blue (6.1-12), orange (12.1-18), green (18.1-24), and yellow (over 24.1), successively, and cut into boards. The proportion of each color was obtained by analysis of the transversal areas of boards with software. MOE was obtained by a nondestructive test. Multiple linear regression models were applied with 5% of significance. The estimated MOE indicates that boards with at least 57% of orange and green colors (between 12.1 - 24 years old) can achieve the minimum MOE value for using as structural as well as boards without red color but with the presence of green and yellow can have MOE bigger than 7000 MPa. The study indicates a behavior tendency about which proportion and mixed colors can affect the MOE of the board to be classified as structural.