Exploring the vertical transport of microplastics in subsurface environments: Lab-scale experiments and field...

Microplastics (MPs) defined as smaller 5 mm plastic particles have received increasing attention due to their global occurrence and potential toxicity. This study investigated the effects of environmental factors (rainfall intensity, 13 and 29 mm/h) and MP characteristics (morphology (fiber, flake, and film), polymer type (polypropylene (PP), polyethylene terephthalate (PET), and polystyrene (PS)) and size (100-300, 300-500, and 500-1000 μm)) on the vertical transport of MP in unsaturated soil conditions using lab-scale column experiments. Additionally, the occurrence and characteristics of MP detected in soil/sediment (total 13 samples) and groundwater samples (total 6 samples) were explored in the field study. Laboratory-scale column experiments revealed that heavy rainfall intensity (29 mm/h) increased the degree of MP vertical transport in unsaturated soil conditions and MP fibers showed the greatest vertical mobility among the various morphologies of MPs assessed. For the polymer type and size, the lighter PP polymer or the larger size of MP (500-1000 μm) showed higher mobility. In the field study, a statistical difference in MP abundance was observed depending on the population density and degree of urban development in both soil and groundwater samples. Comparing to the two different types of environmental media samples obtained from the same site, there was a significant difference in the composition of polymer types present while statistically no difference in MP abundance was observed between the two media samples (i.e., soil or sediment and groundwater). In addition, MP fibers and polyethylene (PE) were predominantly detected in our two study areas. These results suggest that various types of MP can pass through the unsaturated zone by water infiltration, even if it takes a long time to reach groundwater. Overall, we found that the degree of vertical transport of the MPs was highly sensitive to environmental conditions and MP characteristics.