Related Experiment Video
Updated: Jul 25, 2025

Author Spotlight: Simulation and Analysis of the Temperature Rise of Ring Main Unit Equipment
Published on: July 5, 2024
Using urban building energy modeling to quantify the energy performance of residential buildings under climate change
Zhang Deng1,2, Kavan Javanroodi2, Vahid M Nik2,3
1College of Civil Engineering, Hunan University, Changsha, 410082 China.
Abstract:
The building sector is facing a challenge in achieving carbon neutrality due to climate change and urbanization. Urban building energy modeling (UBEM) is an effective method to understand the energy use of building stocks at an urban scale and evaluate retrofit scenarios against future weather variations, supporting the implementation of carbon emission reduction policies. Currently, most studies focus on the energy performance of archetype buildings under climate change, which is hard to obtain refined results for individual buildings when scaling up to an urban area. Therefore, this study integrates future weather data with an UBEM approach to assess the impacts of climate change on the energy performance of urban areas, by taking two urban neighborhoods comprising 483 buildings in Geneva, Switzerland as case studies. In this regard, GIS datasets and Swiss building norms were collected to develop an archetype library. The building heating energy consumption was calculated by the UBEM tool-AutoBPS, which was then calibrated against annual metered data. A rapid UBEM calibration method was applied to achieve a percentage error of 2.7%. The calibrated models were then used to assess the impacts of climate change using four future weather datasets out of Shared Socioeconomic Pathways (SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5). The results showed a decrease of 22%-31% and 21%-29% for heating energy consumption, an increase of 113%-173% and 95%-144% for cooling energy consumption in the two neighborhoods by 2050. The average annual heating intensity dropped from 81 kWh/m2 in the current typical climate to 57 kWh/m2 in the SSP5-8.5, while the cooling intensity rose from 12 kWh/m2 to 32 kWh/m2. The overall envelope system upgrade reduced the average heating and cooling energy consumption by 41.7% and 18.6%, respectively, in the SSP scenarios. The spatial and temporal distribution of energy consumption change can provide valuable information for future urban energy planning against climate change.
More Related Videos
09:55Surface Renewal: An Advanced Micrometeorological Method for Measuring and Processing Field-Scale Energy Flux Density Data
Published on: December 12, 2013
10:36Author Spotlight: Optimization of Airflow Velocities in Battery Cooling Systems for Enhanced Thermal Performance and Reduced Energy Consumption
Published on: November 3, 2023
Related Concept Videos
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Energy Budgets
Global Climate Change
Energy Conservation and Bernoulli's Equation
All the terms in the equation have the dimension of energy per unit volume. The kinetic energy per unit volume is called the kinetic energy density, and the potential energy per unit volume is...
What is Climate?