Conventional and microwave-assisted acid pretreatment of tea waste powder: analysis of functional groups using FTIR

Tea waste powder (TWP) is one of the potential biomass waste to recover valuable chemicals and materials. The prime objective of this work is to investigate the role of acid pretreatment on TWP. Diluted acids (HCl, H₃PO₄, CH₃COOH, and H₂SO₄) were used to soak the TWP to understand the role of acids on bond cleavage and chemicals formation. One gram of TWP was soaked in 100 mL of diluted acids for 24 h. The soaked samples were further subjected to a hot air oven (temperature: 80 °C, duration: 6 h), orbital shaking (shaking speed: 80-100 rpm, duration: 6 h), and microwave irradiation (microwave power: 100 W, duration: 10 min) to understand the synergistic effects of acids and mode of exposure. The pretreated solid samples and liquid samples were analyzed using FTIR to understand the presence of functional groups. The mass loss of TWP after treatment significantly varied with the type of acid and exposure mode used. In the orbital shaker, the mass loss was varied in the following order: H₂SO₄ (36%) > CH₃COOH (32%) > H₃PO₄ (22%) > HCl (15%). In hot air oven, high mass loss was observed compared to orbital shaking [HCl (48%) > CH₃COOH (37%) > H₂SO₄ (35%) > H₃PO₄ (33%)]. The mass loss in microwave irradiation is lower (19 to 25%) with all acids compared to orbital shaking. In the solid samples, O-H stretching, C-H stretching, C=O stretching, C=C stretching, -C-O-, and -C-OH- functional groups were noticed. Similarly, C=O and C=C peaks and C-O and -C-OH peaks were noticed in liquid samples. Interestingly, microwave irradiation showed promising results in 10 min of pretreatment, whereas orbital shaking and hot air oven pretreatments require 6 h to achieve the same result.