Related Experiment Video
Updated: Jul 25, 2025

Time Multiplexing Super Resolving Technique for Imaging from a Moving Platform
Published on: February 12, 2014
Pseudo-arbitrary sideband generation by phase modulation calculated with iterative phase retrieval
Abstract:
A method for arbitrarily tailoring amplitude and phase of sidebands generated with a phase shifting electro-optic modulator (EOM) is presented. The technique is extremely simple experimentally, requiring only a single EOM driven by an arbitrary waveform generator. The required time domain phase modulation is calculated using an iterative phase retrieval algorithm, which takes into account the desired spectrum (both amplitude and phase), and other physical constraints. The algorithm works consistently and finds solutions which accurately recreate the desired spectrum. Since EOMs only modulate phase, the solutions will usually match the desired spectrum over the specified range by redistributing optical power to regions of the spectrum that are unspecified. This basic Fourier limitation is the only in-principle limit to the arbitrariness of the spectrum tailoring. An experimental demonstration of the technique is performed, which shows complex spectra can be generated with high accuracy.
Related Concept Videos
Reconstruction of Signal using Interpolation
Time and frequency -Domain Interpretation of Phase-lead Control
The design of phase-lead control involves the strategic placement of poles and zeros to balance steady-state error and system...
Time and frequency -Domain Interpretation of Phase-lag Control
Phase-lag controllers do not place a pole at zero, but instead influence the steady-state error by amplifying any...
Aliasing
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original...
Phasor Arithmetics
When the derivative of a sinusoid is taken in the time domain, it transforms into its corresponding phasor multiplied by j-omega (jω) in the phasor domain, where j is the imaginary unit, and ω is the angular...
Bandpass Sampling
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2....

