Development of a multispectral fluorescence LiDAR for point cloud segmentation of plants

The accelerating development of high-throughput plant phenotyping demands a LiDAR system to achieve spectral point cloud, which will significantly improve the accuracy and efficiency of segmentation based on its intrinsic fusion of spectral and spatial data. Meanwhile, a relatively longer detection range is required for platforms e.g., unmanned aerial vehicles (UAV) and poles. Towards the aims above, what we believe to be, a novel multispectral fluorescence LiDAR, featuring compact volume, light weight, and low cost, has been proposed and designed. A 405 nm laser diode was employed to excite the fluorescence of plants, and the point cloud attached with both the elastic and inelastic signal intensities that was obtained through the R-, G-, B-channels of a color image sensor. A new position retrieval method has been developed to evaluate far field echo signals, from which the spectral point cloud can be obtained. Experiments were designed to validate the spectral/spatial accuracy and the segmentation performance. It has been found out that the values obtained through the R-, G-, B-channels are consistent with the emission spectrum measured by a spectrometer, achieving a maximum R² of 0.97. The theoretical spatial resolution can reach up to 47 mm and 0.7 mm in the x- and y-direction at a distance of around 30 m, respectively. The values of recall, precision, and F score for the segmentation of the fluorescence point cloud were all beyond 0.97. Besides, a field test has been carried out on plants at a distance of about 26 m, which further demonstrated that the multispectral fluorescence data can significantly facilitate the segmentation process in a complex scene. These promising results prove that the proposed multispectral fluorescence LiDAR has great potential in applications of digital forestry inventory and intelligent agriculture.