Related Experiment Video
Updated: Jul 24, 2025

WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Delayed feedback control for chaotic vibration in nonlinear impact dynamics of bouncing agricultural tractor
Masahisa Watanabe1, Kenshi Sakai2
1Division of Environmental and Agricultural Engineering, Institute of Agriculture, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo, 183-8509, Japan. masahisa-watanabe@go.tuat.ac.jp.
Abstract:
Agricultural tractors often lose contact and recollide with the ground surface while driving on narrow paddy fields and bumpy farm roads owing to excessive vibrations. These nonlinear impact dynamics can cause chaotic vibrations during tractor operation. Chaotic vibrations are random complex motions that can deteriorate tractor stability and lead to tractor overturning accidents, causing damage to machinery and risk of injury to the operator. This study investigates the theoretical feasibility of chaos control to eliminate chaotic vibrations in tractor dynamics. Delayed feedback (DF) control is employed to eliminate complex vibrations in tractor dynamics. First, the frequency response, bifurcation diagram, and largest Lyapunov exponent are obtained to investigate the nonlinear dynamics of the tractor and identify the parametric region in which chaotic vibrations occur. Subsequently, the DF control is designed based on the trial-and-error method and applied to the tractor dynamics as the driving force control input. The numerical results demonstrate that the DF control can successfully eliminate chaotic vibration and reduce the vibration level. Therefore, this study is expected to contribute to improving the tractor safety by reducing the risk of overturning.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Types of Damping
Damped Oscillations
Although friction and other non-conservative...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...

