Laboratory evaluation of RDM-201 Respirable Dust Monitor

The current paper discusses the results of laboratory experiments conducted to evaluate the GCA Respirable Dust Monitor RDM-201 in comparison with the standard Gravimetric Respirable Dust Sampler (GRDS). The samplers were compared in parallel within the atmosphere of an inhalation chamber laden with Arizona Fine Road Dust (AFRD). A wide range of dust concentrations (i.e., from 0.17 to 32:81 mg/m3) was used in the experiments. Sampling time varied from 15 to 120 min. There was a high agreement between the two GRDSs, particularly for samples with dust weight larger than 0.5 mg. The correlation and linearity between the RDM-201 display reading and the actual weight of dust on the instrument's filter were quite high for dust samples larger than 0.5 mg, but dropped significantly for samples less than 0.5 mg. Considering the extremely high dust concentration required to collect a minimum of 0.5 mg of respirable dust within 1-min sampling time of the RDM-201's automatic sampling mode, it was concluded that the use of automatic mode intended for quick evaluation of dusty atmosphere is impractical under most ordinary dusty conditions. The RDM-201 manual mode can be used, however, as reliably as a GRDS, for extended sampling times for assessment of TWAC of respirable dust in the atmosphere of a workplace, providing that a minimum of 0.5 mg sample is collected on the filter.