Mussel- and nacre-inspired dual-bionic alginate-based hydrogel coating with multi-matrix applicability, high...

Natural hydrogel-modified porous matrices with superwetting interfaces are ideal for oil/water separation. In this study, inspired by two marine organisms, a novel hydrogel coating with multi-matrix suitability, high oil/water separation capability and antifouling properties was developed. Specifically, inspired by mussel byssus, hydrogel coating was successfully deposited on porous matrix surface based on the introduction of tannic acid (TA). Moreover, inspired by the "brick and mortar" microstructure of Pinctada nacre, silica particles were in-situ synthesized in the sodium alginate (SA)/Ca²⁺ hydrogel to provide the filling effect and to increase strength. Furthermore, Sodium alginate-tannic acid-tetraethyl orthosilicate (SA-TA-TEOS) hydrogel coating-modified membrane exhibited super-hydrophilic and underwater super-oleophobic performance (underwater oil contact angle >150°), and achieved efficient oil/water separation for four oil/water emulsions (flux = 493-584 L·m^-2·h^-1 and rejection = 97.3-99.5 %). The modified membrane also demonstrated good anti-fouling performance and flux recovery. Notably, hydrogel coating-modified non-woven fabric also had high oil/water separation capacity (rejection >98 %) and cyclic stability, which proved the universal applicability of this hydrogel coating. In short, this work provides new insights into the fabrication of hydrogel coating-modified porous materials based upon a marine organism biomimetic strategy, which has potential applications in separating oil/water emulsions in industrial scenarios.