Performance Improvement during Attitude Motion of a Vehicle Using Aerodynamic-Surface-Based Anti-Jerk Predictive
1Department of Mechanical and Aerospace Engineering, Gyeongsang National University, ReCAPT, Jinju 52828, Republic of Korea.
Abstract:
This study presents the effectiveness of an anti-jerk predictive controller (AJPC) based on active aerodynamic surfaces to handle upcoming road maneuvers and enhance vehicle ride quality by mitigating external jerks operating on the body of the vehicle. In order to eliminate body jerk and improve ride comfort and road holding during turning, accelerating, or braking, the proposed control approach assists the vehicle in tracking the desired attitude position and achieving a realistic operation of the active aerodynamic surface. Vehicle speed and upcoming road data are used to calculate the desired attitude (roll or pitch) angles. The simulation results are performed for AJPC and predictive control strategies without jerk using MATLAB. The simulation results and comparison based on root-mean-square (rms) values show that compared to the predictive control strategy without jerk, the proposed control strategy significantly reduces the effects of vehicle body jerks transmitted to the passengers, improving ride comfort without degrading vehicle handling at the cost of slow desired angle tracking.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
08:18WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Related Concept Videos
01:24Absolute Motion Analysis- General Plane Motion
As the drone's propellers rotate, an upward force is generated that counteracts the force of gravity, enabling the drone to lift off from the ground. This initial movement of the drone is along a straight path, representing a form of translational motion. In this phase, every point on the...
01:09Angular Momentum and Principle Axes of Inertia
To put this equation into simpler terms, it can be reconfigured using rectangular coordinates. This involves choosing an alternative set of XYZ axes that are arbitrarily inclined with respect to the reference frame. The process of deriving the rectangular...
01:26PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
01:26Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
01:22Relative Motion Analysis using Rotating Axes - Acceleration
Time differentiation is...
01:37Rotation with Constant Angular Acceleration - I
Using our intuition, we can begin to see how rotational quantities such as angular displacement, angular velocity, angular acceleration, and time are related to one another. For example, if a flywheel...