Related Experiment Video
Updated: Jul 23, 2025

Fabrication of Superhydrophobic Metal Surfaces for Anti-Icing Applications
Published on: August 15, 2018
Bouncing Regimes of Supercooled Water Droplets Impacting Superhydrophobic Surfaces with Controlled Temperature and
Chunfang Guo1,2, Lei Liu1, Rui Yang1
1College of Mechanical Engineering, Donghua University, Shanghai 201620, China.
Abstract:
Superhydrophobic surfaces have shown significant potential for the passive anti-icing application due to their unique water repellency. Reducing the contact time between the impacting droplets and the underlying surfaces with certain textures, especially applying the pancake bouncing mechanism, is expected to eliminate droplet icing upon impingement. However, the anti-icing performance of such superhydrophobic surfaces against the impact of supercooled water droplets has not yet been examined. Therefore, we fabricated a typical post-array superhydrophobic surface (PSHS) and a flat superhydrophobic surface (FSHS), to study the droplet impact dynamics on them with controlled temperature and humidity. The contact time and the bouncing behavior on these surfaces and their dependence on the surface temperature, Weber number, and surface frost were systematically investigated. The conventional rebound and full adhesion were observed on the FSHS, and the adhesion is mainly induced by the penetration of the droplet into the surface micro/nanostructures and the consequent Cassie-to-Wenzel transition. On the PSHS, four distinct regimes including pancake rebound, conventional rebound, partial rebound, and full adhesion were observed, where the contact time increases correspondingly. Over a certain Weber number range, the pancake rebound regime where the droplet bounces off the surface with a dramatically shortened contact time benefits the anti-icing performance. By further decreasing the surface temperature, the pancake rebound turns into the conventional rebound, where the droplet is not levitated after the capillary emptying process. Our scale analysis indicates that the frost between the posts reduces the capillary energy stored during the downward penetration, resulting in the failure of the pancake bouncing. A droplet adheres onto the frosted surface at sufficiently low temperature, especially at larger Weber numbers, on account of the coupling influence of droplet nucleation and wetting transition.
Related Concept Videos
Phase Transitions: Vaporization and Condensation
States of Water
Water freezes when the intermolecular forces are greater than the kinetic energy. Unlike most other substances, water is less dense in its solid state than in its liquid state. This is because each water molecule can form...
Surface Tension of Fluid
Surface tension varies...
Aqueous Solutions and Heats of Hydration
When ionic compounds dissolve in water, the ions in the solid separate and disperse uniformly throughout the solution because water molecules surround and solvate the ions, reducing the strong electrostatic forces between them. This process...
Surface Tension, Capillary Action, and Viscosity
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded by other molecules and are attracted equally in all directions by the cohesive forces within the liquid. However, the molecules on the surface of a liquid are attracted only by about one-half as many molecules. Because of the unbalanced molecular attractions on the surface molecules, liquids contract to form a shape that minimizes the number...
Precipitation Processes

