Related Experiment Video
Updated: Jul 23, 2025

Author Spotlight: Simulation and Analysis of the Temperature Rise of Ring Main Unit Equipment
Published on: July 5, 2024
Evaluating planting strategies for outdoor thermal comfort in high-rise residential complexes: a computational fluid
Yeongeun Jin1,2, Heeyeun Yoon3,4,5
1Department of Landscape Architecture and Rural Systems Engineering, College of Agriculture and Life Sciences, Seoul National University, 1 Gwanak-Ro, Gwanak-Gu, Seoul, 08826, Republic of Korea.
Abstract:
This study aims to examine the impact of planting strategies on improving thermal comfort in relation to the existing buildings within real high-rise residential complexes. Using numerical simulation via ENVI-met, we compare six planting scenarios characterized by two locational schemes-open-space planting and building-vicinity planting-and three tree quantities. The results highlight the importance of planting greater numbers of trees, and also of their locations, to moderate the thermal environment. The findings of the study demonstrated that increasing the number of trees in the open space by threefold of the advisory guidelines led to a significant reduction in the average air temperature by 0.87 °C, mean radiant temperature (MRT) by 11.00 °C, physiological equivalent temperature (PET) by 4.50 °C, and wind speed by 0.30 m/s. Planting the minimum number of trees under building-vicinity reduced air temperature by 0.07 °C, MRT by 2.48 °C, and PET by 0.92 °C, while showing a slight increase in wind speed of approximately 0.01 m/s. To achieve improvements in both thermal condition and air flow, we suggest planting rows of trees parallel to the prevailing wind direction in the ventilation corridors at some distance from buildings, to minimize overlap of shade from trees and from buildings. The findings of this study will provide useful guidelines for effective planting design in dense residential areas.
More Related Videos
Related Concept Videos
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in...
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
Design Example: Designing a Residential Plumbing System
Conduction, Convection and Radiation: Problem Solving
In order to solve a problem related to heat transfer, first of all, the situation needs to be examined to determine the type of heat transfer involved. This could...
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...

