Thermodynamic Consideration of the Solid Saponin Extract Drop-Air System

The aim of this research was to elucidate the surface active properties of Saponaria officinalis (soapwort) extract containing the plant surfactants saponins. To this end, the advancing contact angle (θ) of water, formamide and diiodomethane on the glass, as well as θ of the aqueous solution of S. officinalis extract fractions on PTFE, PMMA and glass, were studied. Based on the obtained results, the wetting behaviour of saponins was considered with regard to the surface tension components and parameters of the solutions and solids. The investigations also involved the description of the θ isotherms, the dependences between the cosine of contact angle and/or the adhesion of the solution to the solid surfaces and solution surface tension, as well as the critical surface tension of PTFE, PMMA and glass wetting. These dependences were studied based on the saponin adsorption at the different interfaces, which was deduced from the dependence between the adhesion and surface tension of the solution, as well as using the Gibbs and Frumkin isotherm equations. This proved that the saponins are poor wetting agents and that the contact angle isotherm can be described by the exponential function of the second order as well as the Szyszkowski equation, but only for PTFE.