Related Experiment Video
Updated: Jul 23, 2025

Fabric Moisture Uniform Control to Study the Influence of Air Impingement Parameters on Fabric Drying Characteristics
Published on: August 19, 2019
Effective moisture diffusivity prediction in two Portuguese fruit cultivars (Bravo de Esmolfe apple and Madeira
M N Coelho Pinheiro1,2,3,4, Luis M M N Castro1,2,5
1Polytechnic Institute of Coimbra, Coimbra Institute of Engineering, Department of Chemical and Biological Engineering, Rua Pedro Nunes - Quinta da Nora, 3030-199 Coimbra, Portugal.
Abstract:
Air convective dehydration was performed at various temperatures (35 °C, 40 °C, 45 °C and 50 °C) using two types of fruits cultivars produced in different regions of Portugal: the Bravo de Esmolfe apple, from the Beiras province, and the Cavendish banana, from Madeira Island. The data collected were used to predict the effective moisture diffusion, which is a crucial input parameter in drying modeling and design. As expected, the values obtained in both falling drying rate periods detected for apples increased with an increase in drying temperature. The effective moisture diffusion in apples varied from 1.968 × 10-10 m2 s-1 at 35 °C to 4.013 × 10-10 m2 s-1 at 50 °C, for the first falling drying rate period, and from 0.9567 × 10-10 m2 s-1 at 35 °C to 3.328 × 10-10 m2 s-1 at 50 °C, for the second period. The dependence of effective moisture diffusion on temperature for bananas is similar, ranging from 1.572 × 10-10 to 2.627 × 10-10 m2 s-1 as the drying temperature changed from 35 to 50 °C.
More Related Videos
13:27Exploring the Effects of Atmospheric Forcings on Evaporation: Experimental Integration of the Atmospheric Boundary Layer and Shallow Subsurface
Published on: June 8, 2015
08:25BtM, a Low-cost Open-source Datalogger to Estimate the Water Content of Nonvascular Cryptogams
Published on: March 25, 2019
Related Concept Videos
Moisture Content and Bulking of Aggregate
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...
Adaptations that Reduce Water Loss
Precipitation Titration Curve: Analysis
Measurement of Air Content in Concrete
The pressure method,...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...