Related Experiment Video
Updated: Jul 23, 2025

Optimization of Processing of Tiebangchui with Highland Barley Wine Based on the Box-Behnken Design Combined with the Entropy Method
Published on: May 19, 2023
Response surface optimization of chemical coagulation for solid-liquid separation of dairy manure slurry through
Thenuwara Arachchige Omila Kasun Meetiyagoda1, Toshinori Takahashi1, Takeshi Fujino1,2
1Department of Environmental Science and Technology, Graduate School of Science and Engineering, Saitama University, 255 Shimo-okubo, Sakura-ku, Saitama, 338-8570, Japan.
Abstract:
Discharging livestock manure slurry without proper treatment causes various environmental and sociological problems. Chemical coagulation is a widely used and easily applicable method for treating such wastewater. However, the technique requires optimization to enhance coagulation efficiency while minimizing chemical usage. In this study, we propose an efficient, low-cost, and environmentally safe chemical coagulation method for solid-liquid separation of dairy manure slurry. Experiments were conducted in laboratory jar tests using dairy manure slurry to investigate the impact of coagulants, specifically polyaluminum chloride (PAC) and cationic polyacrylamide (CPAM), as well as pH, on the process of solid-liquid separation. Preliminary ranges of PAC, CPAM, and pH were estimated through single-factor experiments. Coagulation optimization and modeling were performed using the response surface methodology (RSM) with the Box-Behnken design (BBD), wherein the desired goal of each parameter was set to maximize solid-liquid separation efficiency while reducing chemical dosage to maintain residual aluminum (Al) concentrations below water quality standards. Numerical optimization predicted that the optimal dosages were 75 mg/L of PAC and 35 mg/L of CPAM at pH 7. Under these conditions, removal efficiencies of 99% for turbidity and 97% for chemical oxygen demand (COD) were achieved, with a minimal residual Al concentration of 0.045 mg/L. Positive zeta potential values in the treated water confirmed complete separation of negatively charged solids in the dairy manure slurry. The response values predicted by BBD aligned with the experimental results, and the analysis of variance (ANOVA) demonstrated the predictability and accuracy of the response models. Consequently, this study highlights the practical application of RSM with BBD in optimizing chemical coagulation using PAC and CPAM to achieve efficient solid-liquid separation in livestock wastewater while maintaining low residual Al concentrations.
More Related Videos
09:16Author Spotlight: Optimization of Processing Technology for Tiebangchui with Zanba Based on CRITIC Combined with Box-Behnken Response Surface Method
Published on: May 12, 2023
10:37Procedure to Evaluate the Efficiency of Flocculants for the Removal of Dispersed Particles from Plant Extracts
Published on: April 9, 2016
Related Concept Videos
Coagulation
Colloidal precipitates
Response Surface Methodology
The process of RSM involves several key steps:
Chemical Equilibria: Systematic Approach to Equilibrium Calculations
The first step is to identify all the chemical reactions involved, The...
Factors Affecting Solubility
Precipitation and Co-precipitation