Related Experiment Video
Updated: Jul 23, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Chloride converts lead slag into a bifunctional material to remove heavy metals
Gang Zhi1, Xianjin Qi1, Guizhi Yan1
1State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming, 650093, China.
Abstract:
Efficient and safe removal of arsenic and lead from industrial wastewater is essential for ecological protection. In this study, we developed a novel method using lead slag as a purifying agent and sodium chloride as a reinforcing agent to remove arsenic and lead from industrial wastewater. Through a combination of experiments and simulations, we elucidated the mechanisms involved in this reaction. The initial concentrations of As and Pb ions in the industrial wastewater were 4333 and 188 mg/L, respectively. After the reaction at 25 °C and a pH ranging from 9.7 to 10, the concentrations of arsenic and lead were reduced to 4.9 mg/L and 0.008 mg/L, respectively, achieving a removal rate of 99.9%. Our experimental results demonstrated that Pb2+ and AsO43- ions released from the lead slag and industrial wastewater reacted with Cl- ions to form Pb5(AsO4)3Cl precipitates, thus effectively eliminating a significant amount of As and Pb species. Simulation studies indicated that Pb5(AsO4)3Cl exhibited exceptional stability below 400 °C and could be directly stored. Additionally, the lead slag, which is rich in silica, played a crucial role in removing and stabilizing As and Pb ions. Under alkaline conditions, silica encapsulated the As and Pb species, adhering to the surface of the Pb-As co-precipitates and forming dense, irregular, small particles with internal and external structures that impeded the efflux of As and Pb ions. This phenomenon was confirmed through scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The kinetics of As and Pb ion removal was consistent with the pseudo-second-order kinetic model, indicating that the removal process was primarily governed by chemical interactions. Lead slag exhibits significant potential and advantages in the removal of As and Pb. This innovative method offers an effective approach to address heavy metal contamination in industrial wastewater, thus contributing to ecological protection.
Related Concept Videos
Extraction: Advanced Methods
Solubility Equilibria
The...
Washing, Drying, and Ignition of Precipitates
Electrodeposition
Electrodeposition can...
Precipitation and Co-precipitation
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...

