Related Experiment Video
Updated: Jul 23, 2025

Pool-Boiling Heat-Transfer Enhancement on Cylindrical Surfaces with Hybrid Wettable Patterns
Published on: April 10, 2017
Thermal performance of dual flow slotted fin mini channel heat sink using Al2O3-H2O and TiO2-H2O: a numerical and
Taha Baig1,2, Amna Adil1,3, S Manzoor4
1Department of Mechanical Engineering, University of Engineering and Technology, Taxila, Pakistan.
Abstract:
To overcome the extensive heat generation inside the microprocessors nanofluids have gained importance because of their better thermophysical properties as compared with air and water. This work proposes a two-pronged strategy for thermal performance enhancement of mini channel heat sinks. Firstly, a novel dual flow slotted fin mini channel heat sink flow configuration is proposed. Secondly, a detailed numerical investigation is performed to assess heat transfer enhancement property of Al2O3-H2O and TiO2-H2O nanofluids. Considering the first step, fin spacing, number of slots, slot thickness and slot angle are investigated in detail yielding to the selection of best structural parameters. Two slots per fin of 0.5 mm thickness at an angle of 45° is selected because it provides better thermal performance as compared with water. Further, numerical assessment of nano fluid behavior was carried out at volumetric concentrations of 0.005% and 0.01%. For the case of novel dual flow slotted fin mini channel heat sink, maximum numerical and experimental advantages in all targeted system properties is observed for Al2O3-H2O nano fluid at volumetric concentration of 0.01%, as compared with water. Al2O3-H2O nano fluid provides better thermal performance both numerically and experimentally as compared with TiO2-H2O nanofluids. Increment in the pressure drop is noted with increasing volumetric concentrations.
More Related Videos
Related Concept Videos
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer I
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Mechanism of heat transfer

