Development of an asymmetric composite PPS-based bag-filter material through membrane laminating and superfine fiber...

Dedusting is crucial for air pollution control, and nonwoven needle felt (NWNF) bag-filters are widely applied for this purpose. Surface treatment of the filter materials can enhance NWNF's performance, but the large discrepancy in pore size between the surface and NWNF layers causes interface effects, impairing reverse cleaning and shortening service life. In this study, a novel PTFE membrane-laminated asymmetrical composite bag-filter was developed, by blending superfine polyphenylene sulfide fiber (PPS) in the original NWNF structure. Image analysis shows a gradual increase in pore size from the surface to the downstream layer. In standard lab-scale tests, the novel M-PPSF-S filter showed moderately higher resistance, significantly longer service life, higher dedusting efficiencies and better cleaning performance, compared to filters without surface laminating and/or superfine fiber blending. Numerical modelling was performed, and the flow fields and pressure distribution in these filter materials were visualized, confirming that M-PPSF-S' unique structure facilitated the alleviation of interface effect and non-steady flow. M-PPSF-S was further scaled up to treat real flue gas from a coal-fired power plant, where constant good performance was observed over 5 months. This study offers a novel and practical way to develop low-cost, high-performance filter materials for high temperature flue gas treatment.