Element distribution in electrochemically treated mine wastewater for efficient resource recovery and water...

The feasibility of recovering major and critical elements from acid mine drainage using a pilot-scale electrochemical reactor (ECR) was investigated by assessing elements concentration and species distribution in the liquid and solid phase (sludge) in multistage tests. These were carried out at different electrical currents (18-22 amps) and thus, pH (8-12). The results showed that major metals Al, Cu and Fe were removed from the liquid phase at pH 5.9 while remaining the majority of Zn (57.2 ppm). On the other hand, at pH 7, the effluent was mainly composed of Mn (7.3 ppm). These results were confirmed by the simulation results using the PHREEQC model, which also identified the main chemical species in solution and the precipitates formed after the treatment (oxyhydroxides/sulfates/oxides). The ECR treatment led to sludges with targeted critical elements, some up to 20 times (Co, Be and Sb) higher than their earth's crustal abundance. At pH 10, rare earth elements in the sludge targeted Ce, followed by Nd and La. This study is one of the few studies carrying a detailed analysis of the behavioural distribution pattern of these elements at each pH, which opens the door for the potential of recovering these elements.