Manipulating Redox Kinetics using p-n Heterojunction Biservice Matrix as both Cathode Sulfur Immobilizer and Anode...

As an attractive high-energy-density technology, the practical application of lithium-sulfur (Li-S) batteries is severely limited by the notorious dissolution and shuttle effect of lithium polysulfides (LiPS), resulting in sluggish reaction kinetics and uncontrollable dendritic Li growth. Herein, a p-n typed heterostructure consisting of n-type MoS₂ nanoflowers embedded with p-type NiO nanoparticles is designed on carbon nanofibers (denoted as NiO-MoS₂ @CNFs) as both cathode sulfur immobilizer and anode Li stabilizer for practical Li-S batteries. Such p-n typed heterostructure is proposed to establish the built-in electric field across the heterointerface for facilitated the positive charge to reach the surface of NiO-MoS₂ , meanwhile inherits the excellent LiPS adsorption ability of p-type NiO nanoparticles and catalytic ability of n-type MoS₂ . As the anode matrix, the implementation of NiO-MoS₂ heterostructure can prevent the growth of Li dendrites by enhancing the lithiophilicity and reducing local current density. The obtained Li-S full battery exhibits an ultra-high areal capacity over 7.3 mAh cm^-2 , far exceeding that of current commercial Li-ion batteries. Meanwhile, a stable cycling performance can be achieved under low electrolyte/sulfur ratio of 5.8 µL mg^-1 and negative/positive capacity ratio of 1. The corresponding pouch cell maintains high energy density of 305 Wh kg^-1 and stable cycling performance under various bending angles.