Fabrication of Thermal Insulation Bricks Using Pleurotus florida Spent Mushroom

This study explores the potential for making lightweight bricks via the use of dry, pulverized spent mushroom materials (SMM) as a thermal insulator. There are five distinct replacement proportions of SMM that are used, and they range from 0% to 15% of the weight of the clay. The firing of the fabricated bricks at temperatures of 700, 800, and 900 °C led to the development of pores on the interior surface of the bricks as a consequence of the decomposition of SMM. The impact of SMM on the physicomechanical characteristics of fabricated bricks is assessed based on standard codes. Compressive strength, bulk density, and thermal conductivity decreased as the SMM content increased, reaching up to 8.7 MPa, 1420 kg/m³, and 0.29 W/mK at 900 °C and 15% substitution percentage. However, cold water absorption, boiling water absorption, linear drying shrinkage, linear firing shrinkage, and apparent porosity increased with the increase in SMM, reaching 23.6%, 25.3%, and 36.6% at 900 °C and 15% substitution percentage. In the study simulation model, there was a significant improvement in energy consumption, which reached an overall reduction of 29.23% and 21.49% in Cario and Jazan cities, respectively.