Study on Mechanical Behavior of Hollow-Core Slab Bridge with Pinned Reinforcement

Joints connect prefabricated hollow-core slabs, the key elements of force transmission of hollow-core slab bridges. The joints are easily damaged, which affects the integrity and safety of the hollow-core slab bridge. This paper uses MIDAS FEA NX finite element analysis software to simulate the deep hinge joint segment model, comparing and analyzing the finite element simulation analysis results with the test results, and proposes the critical parameters of the hinge joint interface and concrete damage plasticity. Further, an assembled hollow slab bridge model is established to compare and analyze the force transfer performance of conventional and pinned reinforcement bridges and reveal the deep joint damage evolution process. The results showed that the hollow slab bridge damage appeared first at the hinge joint interface at the load location. Cracks in the joints can develop along the longitudinal and height directions, with the longitudinal crack length reaching 40% of the span. The vertical crack height can get the lower edge of the paving layer, increasing the distance from the load position, and the cracking height decreases symmetrically. Under an ultimate load, the hinge concrete of conventional reinforcement and pinned reinforcement hollow-core slab bridges showed significant damage in 30-70% and 40-60% of the span, respectively. Compared with the conventional reinforcement bridges, the cracking load and ultimate load of the pinned reinforcement bridges increase by 28.57% and 58.14%, respectively, and the relative deflection under 420 kN load reduces by 97.95%. The hollow slab bridges have improved the force performance and thus enhanced the integrity of the hollow-core slab bridges.