High Sensitivity and Wide Range Refractive Index Sensor Based on Surface Plasmon Resonance Photonic Crystal Fiber

In order to detect the refractive index (RI) of high refractive index materials such as trichlorobenzene and aniline in the near-infrared and mid-infrared spectra and expand the detection range of the refractive index, a surface plasmon resonance (SPR) photonic crystal fiber (PCF) sensor based on an elliptical sensing channel is proposed for high refractive index detection. The fiber core and the analyte channel are surrounded by two types of air holes with different sizes. When the surface plasmon resonance effect appears at the interface between the fiber core and the elliptical sensing layer, obvious resonance peaks appear in the near-infrared and mid-infrared bands. The full vector finite element method (FEM) is used to study the sensing characteristics of the sensor and the influence of structural parameters on the resonance peak. The results demonstrate that the sensor achieves detection in the refractive index range of 1.41-1.58, in the wavelength range of 1600-3200 nm. The average wavelength sensitivity is 9217.22 nm/RIU, and the refractive index resolution is 10.85 × 10^-6 RIU. The proposed sensor realizes high refractive index detection in the near-infrared and mid-infrared bands, and obtains an ultra-wide detection range and higher sensitivity. The sensor has broad application prospects in chemical detection, biomedical sensing and other fields, and provides a theoretical reference for the design of a photonic crystal fiber surface plasmon resonance sensor.