The Intermediate Connection of Subcells in Si-based Tandem Solar Cells

Tandem solar cells are rationally designed and fabricated by stacking multiple subcells to achieve power conversion efficiency well above the Shockley-Queisser (SQ) limit. There is a large selection pool for the subcell candidates, such as Si, III-V, Kesterite, Perovskite, and organic solar cells. A series of different combinations of these subcells have been successfully demonstrated in practical tandem solar cell devices. However, there has not been a systematic summary of how to connect subcells in a tandem solar cell using a practical, cost-effective, and efficiency-beneficial fashion. In this work, the connection manners of subcells within a tandem cell are classified into three main categories, performing sequential growth, using the physical connection, and applying an intermediate layer, focusing on systematical description of intermediate layers using different materials. The advantages and disadvantages of these connection methods and their applicability to tandem cell types are further elaborated using two typical example models, III-V/Si and Perovskite inclusive tandem cell devices. Eventually, this work can provide useful guidance on how to carry out a suitable intermediate connection in the design of tandem solar cells depending on the selected subcells and device structure.