The altered treatment efficiency of the bisulfite/permanganate process by chloride

Bisulfite-activated permanganate (S(IV)/Mn(VII)) process has proven to be a promising method for rapidly degrading micropollutants. Previous studies have shown that the treatment efficiency of the S(IV)/Mn(VII) process suffer from significant water matrix effects while the mechanism still remains unclear. This study systematically investigates the influence of chloride, which is a common water constituent, on the S(IV)/Mn(VII) process. Addition of chloride decreased the removal of methyl phenyl sulfoxide, phenol, benzoic acid and carbamazepine by the S(IV)/Mn(VII) process but increased dimethoxybenzene removal. The distribution of reactive species in the S(IV)/Mn(VII) process in the absence and presence of chloride was determined with relative rate method. The S(IV)/Mn(VII) process primarily relies on SO₄^•- and reactive manganese species (RMnS) for pollutant abatement while dosing chloride decreased the concentration of these reactive species. Reactive chlorine species (RCS), such as Cl₂^•- and ClO^•, are formed through the reaction of SO₄^•- with chloride, and become more important at high concentrations of chloride. RMnS includes Mn(VI), Mn(V) and Mn(III), but none of these species are capable of oxidizing chloride. However, chloride retarded the consumption of bisulfite which reduced RMnS and RCS in turn. DOM inhibited pollutant removal by the S(IV)/Mn(VII) process while the impact mechanism was significantly altered by chloride. Additionally, the study observed a synergistic inhibition of DOM and chloride on the degradation of pollutants that are highly reactive towards Cl₂^•- and ClO^•.