Assessment of the Push-Out Bond Strength for Glass Fiber Posts After Different Surface Treatments: An In Vitro Study

The goal of the study was to assess the push-out bond strength of the glass fibre post after different surface treatments.

For the purpose of the investigation, 40 mandibular premolars were chosen. After gaining access, the biomechanical preparation was completed using the step-back approach up to a size 40K file, and the canals were sealed using gutta-percha cones and the lateral condensation procedure with AH Plus sealer (epoxide-amine resin pulp canal sealer). Peeso reamers were used to remove the canal fillings, leaving 5mm of gutta-percha apically. Drills included in the package were used to prepare the post spaces so that the posts would fit in their respective post slots. These were attached to self-curing acrylic resin blocks. Fibre posts were split into four groupings of n = 10 each for surface treatment, i.e., control, hydrogen fluoride, sandblasting, and hydrogen peroxide. The cementation of posts was done by utilising dual-cure resin cement. Two millimetres of the anatomical crown were removed from each sample. Each sample's 1-mm cervical segment was taken utilising the isotope from the remaining coronal area. To perform a push-out test, at the rate of 0.5mm/min of the crosshead, every sample was inserted into a universal testing device. Each post's dislodge force from the pre-set post spacing was measured. Statistics were utilised to analyse the data.

Strongest bonds were made by silanization, followed by sandblasting (p value=0.002). The weakest bonds were made by the control group.

The ultimate deduction was that when glass fibre posts underwent various types of surface treatments followed by silanization, it had a significant impact on increasing their strength.