Implementation of a coagulation component into a phosphate kinetics model in haemodialysis therapy: A tool for

Sisse H Laursen1,2,3,4,5, Lise Boel2, Lisbet Brandi6

  • 1The Danish Diabetes Academy, Odense University Hospital, Odense, Denmark.

Experimental Physiology
|August 11, 2023
PubMed

A coagulation component should be considered in phosphate kinetics modelling because intradialytic coagulation of the extracorporeal circuit and dialyser might reduce phosphate removal in haemodialysis. Thus, the objective of this study was to add and evaluate coagulation as an individual linear clearance reduction component to a promising three-compartment model assuming progressive intradialytic clotting. The model was modified and validated on intradialytic plasma and dialysate phosphate samples from 12 haemodialysis patients collected during two treatments (HD1 and HD2) at a Danish hospital ward. The most suitable clearance reduction in each treatment was identified by minimizing the root mean square error (RMSE). The model simulations with and without clearance reduction were compared based on RMSE and coefficient of determination (R2 ) values. Improvements were found for 17 of the 24 model simulations when clearance reduction was added to the model. The slopes of the clearance reduction were in the range of 0.011-0.632/h. Three improvements were found to be statistically significant (|observed z value| > 1.96). A very significant correlation (R2  = 0.708) between the slopes for HD1 and HD2 was found. Adding the clearance reduction component to the model seems promising in phosphate kinetics modelling and might be explained, at least in part, by intradialytic coagulation. In future studies, the model might be developed further to serve as a potentially useful tool for the quantitative detection of clotting problems in haemodialysis. NEW FINDINGS: What is the central question of this study? The aim was to add an intradialytic coagulation component to a modified version of a promising three-compartment phosphate kinetics model. The hypothesis was that circuit and dialyser clotting can be modelled by an individual linear phosphate clearance reduction component during haemodialysis treatment. What is the main finding and its importance? Improvements were found for 17 of 24 model simulations when clearance reduction was added to the model. Thus, the kinetics model seems promising and could be a useful tool for the quantitative detection of clotting problems in haemodialysis patients.

Related Concept Videos

Hemodialysis II: Procedure and Complications01:24

Hemodialysis II: Procedure and Complications

DialyzersA hemodialysis (HD) dialyzer is a plastic cartridge containing thousands of parallel hollow fibers, which serve as semipermeable membranes. These fibers are typically made from cellulose-based or other synthetic materials. During HD, blood is pumped into the top of the cartridge and distributed among these fibers. Simultaneously, dialysis fluid, known as dialysate, is introduced into the bottom of the cartridge, bathing the outside of the fibers. Across the semipermeable membrane,...
42
Hemodialysis I: Introduction01:25

Hemodialysis I: Introduction

Hemodialysis (HD) is a medical treatment that artificially removes waste products, excess fluids, and toxins from the blood when the kidneys are no longer able to perform these functions effectively. In this process, blood is filtered through a semipermeable membrane, allowing for the selective removal of waste while preserving necessary components like blood cells and proteins. Hemodialysis is typically performed in patients with end-stage renal disease (ESRD) or severe kidney...
56
Anticoagulant Drugs: Low-Molecular-Weight Heparins01:30

Anticoagulant Drugs: Low-Molecular-Weight Heparins

Hemostasis is a crucial process that prevents excessive blood loss from damaged blood vessels. It involves various mechanisms such as vasoconstriction, platelet adhesion and activation, and fibrin formation. The importance of each mechanism depends on the type of vessel injury. In contrast, thrombosis is the abnormal formation of a blood clot within the blood vessels, leading to potential complications if the clot obstructs blood flow. Thrombosis can be caused by increased coagulability of the...
753
Coagulation01:09

Coagulation

The coagulation phase is a critical part of the body's process to prevent blood loss following injury to blood vessels. It involves chemical reactions that form a clot to seal the injured area. The clotting process begins shortly after injury, within 15-20 seconds for severe damage and 1-2 minutes for minor injuries.
During the coagulation phase, clotting factors, or procoagulants, play a vital role in initiating and progressing the coagulation cascade. This cascade is a series of reactions...
7.1K
Dialysis01:15

Dialysis

Dialysis is a diffusion-based purification process that separates analyte molecules from a complex matrix. This is accomplished by allowing molecules in the solution to pass through a semipermeable membrane into a liquid on the other side. The membrane is usually made of cellulose acetate or cellulose nitrate, and the second liquid must be miscible with the solution. Ions (e.g., chloride or sodium) or organic molecules (e.g., glucose) can pass through the membrane pores, which generally have...
733
Hemodialysis III: Nursing Management01:25

Hemodialysis III: Nursing Management

The nursing management of a patient undergoing hemodialysis includes several critical steps, starting with a thorough assessment before the procedure.Before the Hemodialysis ProcedureFirst, record the patient's vital signs—blood pressure, heart rate, respiratory rate, and temperature—to establish a baseline. This baseline is essential for detecting conditions such as hypotension that could impact the patient's response to dialysis. Document the patient's pre-dialysis weight, as this...
49