Related Experiment Video
Updated: Jul 19, 2025

A Freeze-Thawing Method to Prepare Chitosan-Polyvinyl alcohol Hydrogels Without Crosslinking Agents and Diflunisal Release Studies
Published on: January 14, 2020
Performance of a New Grouting Material under the Coupling Effects of Freeze-Thaw and Sulfate Erosion
Qinyong Ma1,2, Biao Li1
1School of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan 232001, China.
Abstract:
In order to study the performance of a new cement-based grouting material under the coupling of freeze-thaw cycle and sulfate erosion, tests related to the performance of the new grouting material were designed and carried out to analyze the damage mechanism of the material under the coupling of freezing and thawing and Na2SO4 solution by testing the mass change, relative dynamic elastic modulus, compressive strength loss and mineralogical and microstructural properties of the new grouting material. The test results show that with the increase in the number of freeze-thaw cycles, the mass loss and compressive strength loss of the specimens in 15% Na2SO4 solution gradually increased, and the relative dynamic elastic modulus showed a decreasing trend. When the freeze-thaw cycle number was 30, the mass loss rate, compressive strength loss rate and relative dynamic elastic modulus of the specimens in Na2SO4 solution were 4.17%, 24.59% and 84.3%, respectively, which showed better erosion and frost durability. Mineralogical and microstructural analysis showed that SO42- in solution led to the decomposition of the C-S-H gel and the formation of CaSO4•2H2O inside the specimen, and the internal deterioration was exacerbated by the widening of the crack width being aggravated, suggesting that the rate of material deterioration under the coupling of the two factors increased.
More Related Videos
10:00Experimental Protocol to Determine the Chloride Threshold Value for Corrosion in Samples Taken from Reinforced Concrete Structures
Published on: August 31, 2017
05:38Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
Related Concept Videos
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Frost Action on Concrete
This freeze-thaw cycle primarily causes surface scaling, where...
Unsoundness of Aggregate due to Volume Change
Effects of Air-entrainment in Concrete
Sulfate Attack on Concrete
Sulfates from sources like soil, groundwater, or industrial effluents...
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...