Related Experiment Video
Updated: Jul 19, 2025
An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature
Published on: September 23, 2018
Aluminium Matrix Composites Reinforced with AlCrFeMnNi HEA Particulates: Microstructure, Mechanical and Corrosion
Elias A Ananiadis1, Alexandros E Karantzalis1, Athanasios K Sfikas2
1Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece.
Abstract:
Novel aluminium matrix composites have been fabricated using a powder metallurgy route with reinforcement phase particles of high entropy alloy (HEA) consisting of third transition metals. These new composites are studied as far as their microstructure (SEM, XRD), basic mechanical properties (hardness, elastic modulus) and creep response using nanoindentation techniques are concerned. Wear (sliding wear tests) and corrosion behaviour (in 3.5 wt.% NaCl environment) were also assessed. It was observed that, microstructurally, no secondary intermetallic phases were formed. Hardness and wear resistance seemed to increase with the increase in HEA particles, and in terms of corrosion, the composites exhibited susceptibility to localised forms. Nanoindentation techniques and creep response showed findings that are connected with the deformation nature of both the Al matrix and the HEA reinforcing phase.
