Thermally Conductive and Electrically Insulating Epoxy Composites Filled with Network-like Alumina In Situ Coated...

With the rapid development of the electronics industry, there is a growing demand for packaging materials that possess both high thermal conductivity (TC) and low electrical conductivity (EC). However, traditional insulating fillers such as boron nitride, aluminum nitride, and alumina (Al₂O₃) have relatively low intrinsic TC. When graphene, which exhibits both superhigh TC and EC, is used as a filler to fill epoxy resin, the TC of blends can be much higher than that of blends containing more traditional fillers. However, the high EC of graphene limits its application in cases where electrical insulation is required. To address this challenge, a method for coating graphene sheets with an in situ grown Al₂O₃ layer has been proposed for the fabrication of epoxy-based composites with both high TC and low EC. In the presence of a cationic surfactant, a dense Al₂O₃ layer with a network structure can be formed on the surface of graphene sheets. When the total content of Al₂O₃ and graphene mixed filler reached 30 wt%, the TC of the epoxy composite reached 0.97 W m^-1 K^-1, while the EC remained above 10¹¹ Ω·cm. Finite element simulations accurately predicted TC and EC values in accordance with experimental results. This material, with its combination of high TC and good insulation properties, exhibits excellent potential for microelectronic packaging applications.