Research on Directional Hydraulic Coal Cutting and Outburst Prevention Technology in Soft and Hard Composite Coal...

Affected by tectonics, soft and hard composite coal seams are widely distributed in China; the soft stratification in the soft and hard composite coal seam is the key to controlling the occurrence of coal and gas outburst accidents. Based on this, for soft and hard composite coal seams, in order to accurately extract soft layers, a directional hydraulic coal mining equipment has been developed, including a drilling rig pump truck system, a directional coal wireless measurement system, and a cutter drill pipe system. By constructing a mathematical model and conducting numerical simulations, it was found that the vertical stress, horizontal stress, and gas pressure of the coal body around the borehole after coal extraction decreased significantly compared to normal borehole conditions; the on-site test results indicate that the hydraulic coal extraction volume of directional hydraulic coal extraction boreholes reaches 0.25 m³ per meter. The total amount of coal extracted accounts for more than 3‰ of the total amount of coal within the coverage area. The average concentration of gas extraction in the coal extraction area is 80.15%, and the net amount of gas extraction from 100 m boreholes reaches 0.17 m³/(min·hm). After extraction, the measured residual gas content in the coal extraction and non-extraction areas decreased by 59.27 and 40.38%, respectively. Directional hydraulic coal mining technology can effectively solve the problem of coal and gas outburst prevention in soft and hard composite coal seams and has good application prospects.