Tribological properties of high-speed steel surface with texture and vertical fibers

Inadequate lubrication of the two touching surfaces during friction can lead to severe wear, especially in metal cutting. Therefore, a surface with synergistic anti-friction effect of texture and solid lubricant was proposed to improve lubrication. A mesh texture with excellent wettability was prepared on the high-speed steel (HSS) surface by laser, and then nylon fibers were vertically implanted into the grooves of the texture using the electrostatic flocking technology. The friction and wear state of different surfaces (smooth, textured, flocking) under dry/oil-lubricated were studied by a linear reciprocating wear tester. The coefficient of friction (COF) under different working conditions was used to analyze the anti-friction properties, and the wear rate was used to evaluate the wear resistance of the surface. The results showed that the tribological properties of flocking surfaces were better than those of the other two surfaces. This is because the addition of nylon fibers eases shear at the edges of the texture. The broken fibers form a solid lubricating film on the specimen surface, which prevents the surface from being scratched by debris. In addition, it is found that COF decreases with increasing load. Finally, the rapid wettability of the oil droplets on the flocking surface shows the great potential of the surface for lubrication and anti-friction.