Removal of Cr (VI) and microbial community analysis in PCB wastewater treatment based on the BESI® process

The treatment efficiency of Chromium (Cr)-containing Printed Circuit Board (PCB) wastewater is significantly hampered by the limited physiological activity of microorganisms when activated sludge is applied. In this study, the biodegradation and electron transfer based on sulfur metabolism in the integrated (BESI®) process use sulfur as the electron acceptor to achieve sulfate reduction and sulfide oxidation, leading to efficient removal of Cr. The concentrations of total Cr and Cr(VI) in the effluent were reduced to 0.5 mg/L and 0.1 mg/L, respectively, from an initial range of 25-32 mg/L in the influent. The removal of Cr (ΔC(Cr(VI))) mainly occurred in the Sulfate Reduction (SR) reactor, which was significantly correlated with the generation of sulphide ([Formula: see text]) (R2 = 0.9987). Meantime, analysis of the microbial community showed that Cr (VI) stress increased the diversity of the bacterial community in sludge. The presence of Clostridium (52.54% and 47.78%) in SR & Sulfide Oxidation (SO) reactor, along with the Synergistaceae (31.90%) and Trichococcus (26.59%) in aerobic reactor, might contribute to the gradient degradation of COD, resulting in a removal efficiency exceeding 80% when treating an influent with a concentration of 1000 mg/L. In addition, the main precipitation components in the SR reactor were identified by scanning electron microscope, indicating that Cr has been removed from wastewater as Cr(OH)3 precipitation. This study sheds light on the potential of using the BESI® process for the real PCB wastewater treatment.