Related Experiment Video
Updated: Jul 19, 2025

A Standard and Reliable Method to Fabricate Two-Dimensional Nanoelectronics
Published on: August 28, 2018
Polarization-Sensitive, Self-Powered, and Broadband Semimetal MoTe2/MoS2 van der Waals Heterojunction for
Lingxian Kong1, Guangliang Li2, Qi Su2
1State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, China.
Abstract:
The emerging type II Weyl semimetal 1T' MoTe2 as a promising material in polarization-sensitive photodetectors has aroused much attention due to its narrow bandgap and intrinsic in-plane anisotropic crystal structure. However, the semimetal properties lead to a large dark current and a low response. Herein, we demonstrate for the first time an all-2D semimetal MoTe2/MoS2 van der Waals (vdWs) heterojunction to improve the performance of the photodetectors and realize polarization-sensitive, self-powered, and broadband photodetection and imaging. Owing to the built-in electric field of the heterojunction, the device achieves a self-powered photoresponse ranging from 520 to 1550 nm. Under 915 nm light illumination, the device demonstrates outstanding performance, including a high responsivity of 79 mA/W, a specific detectivity of 1.2 × 1010 Jones, a fast rise/decay time of 180/202 μs, and a high on/off ratio of 1.3 × 10.3 Wavelength-dependent photocurrent anisotropic ratio is revealed to vary from 1.10 at 638 nm to 2.24 at 1550 nm. Furthermore, we demonstrate the polarization imaging capabilities of the device in scattering surroundings, and the DoLP and AoLP images achieve 78% and 112% contrast enhancement, respectively, compared to the S0. This work opens up new avenues to develop anisotropic semimetals heterojunction photodetectors for high-performance polarization-sensitive photodetection and next-generation polarized imaging.
More Related Videos
08:12Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
08:50Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication
Published on: November 28, 2017
Related Concept Videos
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...