Reuse of Lignin to Synthesize High Surface Area Carbon Nanoparticles for Supercapacitors Using a Continuous and...

There is a growing demand for the synthesis of high surface area carbons, also known as carbon nanoparticles (CNPs). Existing synthesis methods for high surface area carbons have limited environmental benignity and economic viability due to the requirement of multistep and batch processes and harsh activating and/or templating chemicals. Herein, we demonstrate the synthesis of high surface area CNPs from lignin, a waste byproduct, through a single-step, continuous gas phase aerosol technique without the use of activating or templating chemicals. This continuous approach requires significantly less time for synthesis: on the order of seconds in comparison to hours for conventional methods. Properties of carbon materials synthesized from lignin are controlled by temperature and residence time, and the role of these parameters inside the aerosol reactor on carbon nanoparticle size, morphology, molecular structure, and surface area is systematically investigated. Furthermore, the as-obtained carbon nanoparticles are tested for specific capacitance, and the best-performing material (surface area 925 m²/g) exhibited a specific capacitance of 247 F/g at 0.5 A/g with excellent capacity retainment of over 98% after 10,000 cycles. This is a clear demonstration of their superior performance compared with supercapacitors synthesized earlier from lignin. Overall, the simple (single-step, continuous, and rapid) operation and the avoidance of the use of activating/templating chemicals make the aerosol technique a promising candidate for the scalable and sustainable synthesis of CNPs from lignin.