Preparation and characterization of self-standing biofilms from compatible pectin/starch blends: Effect of pectin...

Pectin structure-miscibility-functionality relationships in starch films remain unknown. In this study, five citrus pectins (CPs) with 17 to 63 % of degree of methyl esterification (DM) and sugar beet pectin (SBP, rich in acetyl moieties and rhamnogalacturonan-I domains) were investigated for composition and structure and, further, blended with pea starch (3:1 starch-pectin weight ratio) to fabricate self-standing films. The incorporation of pectin resulted in a two- to three-fold increase in tensile strength and Young's modulus (up to 52.2 and 1837 MPa, respectively, using CP with low DM) without compromising elongation at break. Starch-SBP films presented the lowest strength among pectin films. Lower film moisture and water vapor permeability were attained with CP of high DM, or with SBP, whereas surface wettability was explained by counteracting factors affecting film compositional heterogeneity. Films made with high methoxyl CP, or with SBP, showed lower overall H-bonding (FTIR) and starch crystallinity (XRD). A DM above 57 % negatively affected the mixing and interfacial adhesion of pectin with starch, as shown by Attenuated Total Reflection-FTIR imaging. Pectins with the lowest purity, presumably with the greatest content in xyloglucan, as suggested by HPAEC, presented ~20 % higher elongation at break than the other films.